Washing Machine Making Noise During Spin: Causes and Fixes

Washing machine repair technician at work

💡 Quick answer: A washing machine that is loud during spin usually has a coin or object in the drum or pump, an unbalanced load, transit bolts still fitted, or worn drum bearings, shock absorbers or springs. A rumbling or roaring that gets louder as the drum speeds up is the classic sign of worn bearings and needs a technician.

Need a technician? Shozi Home Appliance Repairs provides washing machine repair in Abu Dhabi with home visits across Abu Dhabi City, Mussafah, Khalifa City and nearby areas. Call or WhatsApp +971 50 581 8026, 9:00 AM–8:00 PM.

Listen to the Type of Noise

  • Rattling or clicking: often a coin, key, bra wire or button stuck between the drum and tub, or in the pump.
  • Thumping or banging: an unbalanced load, an uneven floor, or worn shock absorbers.
  • Rumbling or roaring that rises with speed: worn drum bearings.
  • Squealing: a worn or slipping drive belt on belt-driven machines.
  • Humming or grinding while draining: the drain pump, or an object stuck in it.

Simple Checks You Can Do

  1. Empty pockets before washing, and check the drum and door seal for coins and small items.
  2. Clean the drain pump filter at the bottom front; objects often collect there.
  3. Spread the load evenly and avoid spinning a single heavy item on its own.
  4. Check the machine is level and all four feet touch the floor.
  5. On a newly installed machine, make sure the transit bolts on the back have been removed. Running with them fitted causes violent shaking and damage.

Worn Drum Bearings

Bearings support the drum and wear out over time, faster if the machine is often overloaded or water has leaked past the drum seal. Signs include a loud rumble during spin, play or movement when you lift the drum by hand, and sometimes rust-coloured water marks under the drum. Bearing replacement is a major repair because the drum has to be taken apart, so it is worth comparing the cost with the age of the machine.

Shock Absorbers, Springs and the Motor

Shock absorbers and suspension springs keep the drum steady. When they wear, the drum knocks against the cabinet and the machine may move across the floor. On Direct Drive machines, a loose rotor can also knock, and on belt-driven machines a worn belt or motor brushes can make noise. These parts are replaced individually and are usually moderate repairs.

Why It Matters in Abu Dhabi Homes

In apartments, a noisy spin can disturb neighbours and a failing machine can leak into the unit below. In villas, large family loads put more strain on bearings and suspension. Dealing with a new noise early usually means a smaller repair.

Noise During Wash, Drain or Spin?

Noting when the noise happens narrows down the cause. A noise only while draining usually comes from the drain pump or an object in it. A noise during the wash that also happens at low speed suggests an object between the drum and tub, or a belt or motor issue. A noise that only appears and grows during the spin points to bearings, an unbalanced load or worn suspension.

How to Remove an Object From the Drum

Coins and underwire can drop through the drum holes into the space between the drum and the outer tub. Some can be reached through the drain pump filter. Others need the heater or a rear panel removed, which should be done by a technician with the machine unplugged and drained. Using wash bags for underwear and small items prevents most of these problems.

When to Book a Repair

Book a technician if the noise continues after the checks above, if it gets louder over time, or if the machine moves or leaks. See our washing machine repair in Abu Dhabi page.

Frequently Asked Questions

Is it safe to keep using a noisy washing machine?

A rattle from a coin is not dangerous once it is removed. A loud rumbling from bearings or heavy banging should be checked soon, because continued use can damage the drum, tub and other parts.

How do I know if my washing machine bearings are worn?

With the machine off and empty, lift the drum edge by hand. Noticeable play or a grinding feel when you turn it, plus a rumble that rises with spin speed, suggests worn bearings.

Related Repair Guides