Bosch and Siemens Washing Machine Error Codes

Washing machine repair service in Abu Dhabi

💡 Quick answer: Bosch and Siemens washing machines share most error codes because they are made by the same group. E18 (or F18) means the machine is not draining, E17 means it is not filling, E23 means water has leaked into the base, E21 is a motor fault and E25 is a dirty water-quality sensor. Many drain and fill codes can be fixed with simple checks.

Need a technician? Shozi Home Appliance Repairs provides washing machine repair in Abu Dhabi with home visits across Abu Dhabi City, Mussafah, Khalifa City and nearby areas. For brand-specific help, see Bosch and Siemens washing machine repair in Abu Dhabi. Call or WhatsApp +971 50 581 8026, 9:00 AM–8:00 PM.

E Codes and F Codes

Depending on the model and age, Bosch and Siemens machines show codes starting with E or F; E18 and F18 mean the same thing. Some newer machines also show a short text message or an icon. Find the model and E-Nr on the label around the door opening, and note the code and when it appeared.

Water Codes: E17 and E18

  • E17 / F17 (water not filling): make sure the tap is open and the inlet hose is not kinked. Many Bosch and Siemens machines use an Aquastop hose with a safety valve at the tap end; if that valve has tripped or failed, the machine will not fill.
  • E18 / F18 (water not draining): put a towel down, open the small cover at the bottom front, drain the water through the emergency hose and unscrew the pump filter to clean it. Coins, hair clips and lint are common causes. If the code returns, the drain pump may be faulty.

Heating and Sensor Codes: E19 and E25

  • E19 / F19: the water did not reach the selected temperature in time. The heating element, temperature sensor or limescale on the heater may be the cause.
  • E25 / F25: the AquaSensor (water clarity sensor) is dirty or faulty. Running a hot cleaning cycle and cleaning the pump filter often helps.

Leak and Motor Codes: E23 and E21

  • E23 / F23 (water in the base): water has collected in the base tray and lifted the leak-protection float. Switch the machine off and close the tap. The leak can come from a hose, the pump, the detergent drawer or the tub, and it must be repaired before use. Too much foam can sometimes cause it too.
  • E21 / F21 (motor fault): the drum is not turning. Something may be jammed between the drum and tub, the carbon brushes may be worn, or the motor or control may be faulty.
  • Key symbol: child lock is on, which is not a fault.

Safe Checks First

  1. Switch off at the socket for a few minutes and restart.
  2. Clean the pump filter and check the inlet and drain hoses.
  3. Check the Aquastop hose is not damaged and the tap is fully open.
  4. Use low-foaming detergent in the correct dose.

For E23, E21 or E19, or any code that keeps returning, book a technician. Integrated machines also need careful removal from the kitchen unit.

What Is an Aquastop Hose?

Many Bosch and Siemens machines have an Aquastop inlet hose with a safety valve at the tap end and a double-walled hose. If the inner hose leaks, the valve shuts off the water and the machine shows E17 or E23. The valve is a safety device, so a tripped Aquastop hose is normally replaced rather than reset. Do not bypass it with an ordinary hose.

Preventing Bosch and Siemens Error Codes

  • Clean the pump filter every few months.
  • Use low-foaming detergent and avoid overdosing, which can trigger E23 foam leaks.
  • Run a hot cleaning cycle monthly to keep the AquaSensor and heater free of residue.
  • Check the Aquastop hose for kinks, especially behind integrated machines.

Bosch and Siemens Washing Machine Repair in Abu Dhabi

We repair freestanding and integrated Bosch and Siemens washing machines at home across Abu Dhabi. See Bosch and Siemens washing machine repair for details.

Frequently Asked Questions

Can I use my Bosch washing machine with an E23 error?

No. E23 means water has leaked into the base of the machine. Keep it switched off with the tap closed until the leak is found and repaired, to avoid water damage and electrical risk.

Why does my Bosch washing machine show E18 after cleaning the filter?

If the filter and drain hose are clear, the drain pump itself may have failed or the drain may be blocked further down, in the standpipe or sink waste. A technician can test the pump.

Related Repair Guides