💡 Quick answer: LG washing machine error codes point to the part of the machine that stopped the cycle: OE means it cannot drain, IE means it cannot fill, UE means the load is unbalanced, dE is a door-lock problem and LE is a motor problem. Many can be cleared with simple checks; repeated codes usually need a technician.
Need a technician? Shozi Home Appliance Repairs provides washing machine repair in Abu Dhabi with home visits across Abu Dhabi City, Mussafah, Khalifa City and nearby areas. For brand-specific help, see LG washing machine repair in Abu Dhabi. Call or WhatsApp +971 50 581 8026, 9:00 AM–8:00 PM.
How LG Error Codes Work
LG front-load and top-load washing machines check water level, door lock, motor speed and temperature throughout every cycle. When one of these checks fails, the machine stops and shows a two-letter code. The code tells you where to look, not always which part has failed. A drain code, for example, can be caused by a sock in the filter or by a dead pump.
Write down the exact code, when it appeared (filling, washing, draining or spinning) and the model number from the label inside the door or on the back. This information makes any repair visit faster.
Drain and Water Codes: OE, IE, FE and PE
- OE (drain error): water is not leaving the drum in time. Switch off, drain the remaining water through the small hose behind the filter cover at the bottom front, then clean the drain filter. Check the drain hose is not kinked or pushed too far into the standpipe.
- IE (inlet error): water is not filling. Make sure the tap is fully open, the inlet hose is not bent, and the small mesh filter where the hose connects to the machine is not blocked by limescale or sand.
- FE (fill error): too much water has entered the drum. This usually points to a faulty inlet valve or water level sensor and needs a technician.
- PE (pressure sensor error): the machine cannot read the water level correctly. The pressure sensor or its hose may be faulty or blocked.
Door and Balance Codes: dE and UE
- dE, dE1, dE2: the door is not closed properly or the lock is not engaging. Check nothing is caught in the door seal and close the door firmly. If the code continues, the door lock or latch may need replacing.
- UE (unbalanced load): the laundry is bunched to one side, so the machine will not spin at full speed. Redistribute the load and avoid washing one heavy item, such as a bath mat or blanket, on its own.
- CL: child lock is on. This is not a fault; hold the child lock button for a few seconds to switch it off.
Motor, Heating and Leak Codes: LE, tE and AE
- LE (locked motor): the Direct Drive motor is overloaded or cannot turn. Reduce the load and restart. If it repeats, the rotor, stator or hall sensor may be faulty.
- tE: the heater or temperature sensor is not working correctly, so the water does not heat as expected.
- AE: the machine has detected a leak and switched off. Stop using it, turn off the water supply and have the leak found before the next wash.
- PF: the power was interrupted during the cycle. Press start to resume.
Safe Checks Before You Call
- Turn the machine off at the socket for a few minutes, then restart.
- Clean the drain filter and inlet hose filter.
- Check hoses for kinks and the tap for full flow.
- Redistribute the laundry and check the door seal is clean.
- Never open panels or remove the door lock yourself while the machine is connected to power or water.
If the same code returns after these checks, the fault is inside the machine and needs testing with the right tools.
How to Prevent LG Error Codes
- Clean the drain filter every two to three months, and more often if you wash sandy beach or pool towels.
- Use HE (high-efficiency) detergent in the recommended dose; too much detergent causes foam and drain errors.
- Do not overload the drum: leave a hand’s width of space at the top.
- Leave the door open after washing so the door seal and lock area stay dry.
- Check the inlet hose filter once or twice a year, as Abu Dhabi water carries limescale and fine sand.
When to Book an LG Washing Machine Repair
Book a repair if a code keeps coming back, if the machine shows LE, AE or tE, if water stays in the drum after cleaning the filter, or if you hear grinding or loud knocking. See our LG washing machine repair in Abu Dhabi page for how a visit works, or our general washing machine repair page for other brands.
Frequently Asked Questions
How do I reset an LG washing machine error code?
Turn the machine off, unplug it for about five minutes, then plug it back in and start a new cycle. This clears the code but does not fix the cause, so if the code returns, follow the checks for that code or book a repair.
Is the OE error expensive to fix?
Often not. Many OE errors are caused by a blocked drain filter or hose that you can clear yourself. If the drain pump has failed, it needs replacing, which is still one of the more common and straightforward washing machine repairs.